/Files/Icons/phone.svg

+45 70 20 31 31

/Files/Icons/envelope.svg

sales@mouldpro.com

/Files/Icons/1_none.svg

Contact us

/Files/Icons/1_none.svg

About
- Jobs
- Meet us

/Files/Icons/user.svg

Sign in
- Sign in
- Forgot password

Products
Products To the overview →

Mould Cooling

Mould Cooling To the overview →

Couplers

Couplers To the overview →

International Series

European Series

French Series

French Matic

Scandinavian Series

BBI Coupling Series

Large Flow Couplings

Multi Couplings

Hoses

Hose Protection

Hose Clips

Fittings

Valves

Push In Fittings

Manifolds

Sealant & Tape

Hose Assembly Tool

Flow Measurement & Control

Flow Measurement & Control To the overview →

Flow Measurement

Flow Measurement To the overview →

Single Line

Single Line To the overview →

Digital Meters

Analogue Meters

Flosense 1.0

Spare Parts

Multi Line

Multi Line To the overview →

Analogue flow regulation

Digital flow Monitoring and regulation

Spare Parts

De-Scaling

Pressure testing

Water treatment

Filters

Consumables

Consumables To the overview →

Mould Cleaner

Mould Release

Mould Protect

Mould Lubricants

Mould Polish

Nano Mould Coating

Purging Compound

Multi Wipes

Absorbents

Temperature Control

Temperature Control To the overview →

Hot Runner Controllers

Heater Bands

Thermocouples

Connectors

Connectors To the overview →

Square Connectors

Narrow Connectors

Standard Connectors

High Density Connectors

Mini Connectors

Cables

Thermometers

Thermal Cameras

Cable Glands

Cable Cutter And Stripper

Material Handling

Material Handling To the overview →

Loader Hose

Hot Air Hose

Hose Clamps

Camlock Couplings Aluminium

Metal Detection

Material Scoops

Moisture Analyser

End of Arm Tooling

End of Arm Tooling To the overview →

Quick Change System

Quick Change System To the overview →

Dovetail Plate Quick Change System

EOAT Base Plates

Wall Mount Dovetail

Round Quick Changer System

Quick Changer Interface

Electrical Connectors

Wall Mounts Round

Locating Pin

Profile & Channel Nuts

Profile & Channel Nuts To the overview →

Aluminum Profiles

Channel Nuts

Profile Accessories

Profile Connectors

Profile Connectors To the overview →

Profile Corner Bracket

Cross Joint Connectors

Square Joint Connectors

End Connectors

S, L, T Flat Connectors

Adjustable Connectors

Clamps

Clamps To the overview →

Cross Clamps

Angle Clamps

Angle Clamps With Ball Joint

Angle Clamps With Swivel Head

Slotted Mounting Brackets

Threaded Mounting Brackets

Cross Tube Connector

Parallel Tube Connector

Reducer

Gripper Arms

Gripper Arms To the overview →

Heavy Duty Elbow Arms

Elbow Arms

Angle Arms

Centering Pin

Extension Tubes

Gripper Suspension – Swivel Head

Spring Loaded Elbow Arm – Swivel Head

Vacuum Cup Mounts

Vacuum Cup Mounts To the overview →

Suspensions for Vacuum Cups

Rigid Vacuum Cup Arms

Vacuum Cup Mounts

Vacuum Cup Mounts – Long

Suspensions Rotative

Suspensions Non-Rotative

Suspensions Non-Rotative Swivel Head

Spring Loaded Vacuum Cup Arm Rotative

Spring Loaded Vacuum Cup Arm Non-Rotative

Spring Loaded Vacuum Cup Arm Non-Rotative Swivel Head

Level Compensators Non-Rotative

Telescopic Self- Retracting Suspensions

Spring Rod

Vacuum Cups

Vacuum Cups To the overview →

G Series, Flat Cups

F Series, Flat Cups with Cleats

B Series, 1.5 Bellow Cups

CM Series, 1.5 Bellow Cups

CL Series, 1.5 Bellow Cups

CL Series, 2.5 Bellow Cups

G Series, 1.5 Bellow Cups with Foam Ring

G Series, 2.5 Bellow Cups with Foam Ring

Fittings

1.5 Bellow Multiflex Vacuum Cups

2.5 Bellow Multiflex Vacuum Cup

Sprue Grippers

Sprue Grippers To the overview →

M - Series Sprue Grippers

Mini Sprue Grippers

Small Sprue Grippers

Compact Sprue Grippers

Compact Sprue Grippers – GZ.AA

Large Sprue Grippers

Power Grippers

Finger Grippers

Finger Grippers To the overview →

Finger Grippers 21°

Finger Grippers 21°, 25°

35° - 90° - 95 Finger Grippers

Finger Grippers with Stops

Stops, Guides & Spares

Sensor & Sensor Mounting Brackets

90° Tilt Units

Perpendicular Finger Grippers

General Purpose Grippers

General Purpose Grippers To the overview →

Compact Parallel Grippers

Parallel Grippers

Jaws for Parallel Grippers

Angular Grippers

Speciality Grippers

Speciality Grippers To the overview →

Doc and Lock Grippers

Expansion Grippers

Nippers

Nippers To the overview →

Nipper Bodies

Air Nipper Blades - N Series

Nipper Blades - GPT Series

Nipper Mounts

Cylinders & Slides

Cylinders & Slides To the overview →

Compact Cylinders with Guide Rod

Compact Cylinders

Mounts & Accessories

Vacuum Cylinders

Mini Cylinders

Accessories

Fittings, Tube & Manifolds

Fittings, Tube & Manifolds To the overview →

Manifolds

Fittings – G Thread with O-Ring

Push to Connect Fittings

Fitting – R Thread

Male Elbow Flow Controller

Inline Flow Controller

Tube

Electronics & Sensors

Electronics & Sensors To the overview →

Cable Connectors

Magnetic Sensors for C Slots

Magnetic Sensors for T Slots

Programmable Sensors for C Slots

Inductive Sensors

Sensor Boxes

End of Barrel

End of Barrel To the overview →

Removable Nozzle Tips - Mouldpro Type

OEM Nozzle Tips - Arburg Type

OEM Nozzle Tips - Fanuc Type

OEM Nozzle Tips - Demag Type

OEM Nozzle Tips - Engel Type

Screw Tips

Tip Spanner

Tools & Accessories

Tools & Accessories To the overview →

Gate cutters

Deburring tools

Soft tools

Pry Bars

Accessories

Polishing & Abrasives

Polishing & Abrasives To the overview →

Polishing Machines

Rotary Tools

Polishing Stones and Files

Diamond Paste

Abrasives and Gauze

Brushes

Compressed Air Blow Guns

Measuring tools

Magnifying Glasses

Machine Accessories

Machine Accessories To the overview →

Mould Screens

Ejector Couplings

Linear Transducer

Hydraulic Couplings

Hydraulic Couplings To the overview →

BPX Hydraulic Coupling Series

Hydraulic Coupling Type A/ B

Mould Clamping

Mould Clamping To the overview →

Power Clamps

Mechanical Clamps

Nuts & Washers

Straight Studs

T-nuts

Mould Handling

Mould Handling To the overview →

Swivel Anchor point

Super Lifting Points

Eye Bolts And Shackles

Lifting Chain Slings

Mould Feet

Mould Splitting Tables

Mould Components

Mould Components To the overview →

Ejector Pins

Dowel Pins

Screws

Spring Plungers

ISO Springs

Mould Monitoring

Mould Cooling

Flow Measurement & Control

Consumables

Temperature Control

Material Handling

End of Arm Tooling

End of Barrel

Tools & Accessories

Machine Accessories

Mould Clamping

Mould Handling

Mould Components

Mould Cooling

Mould cooling couplings, hoses, fittings and valves for precise temperature control — reliable components for faster cycle times and consistent mould performance.

Couplers

International, European, French, and Scandinavian series couplers for mould cooling. Quick-connect solutions for diverse machine configurations.

International Series

International series quick couplers for mould cooling — widely compatible fittings for use across different machine brands and global standards.

European Series

European series couplers for mould cooling. Built to European standards for reliable, leak-free connections across a wide range of applications.

French Series

French series couplers for mould cooling systems. Compatible with French industrial standards for secure and consistent coolant connections.

French Matic

French Matic quick-release couplers for fast, one-handed connection and disconnection in high-frequency mould cooling applications.

Scandinavian Series

Scandinavian series couplers for mould cooling. Reliable fittings built to Nordic industrial standards for secure coolant connections.

BBI Coupling Series

BBI series couplers and nipples for mould cooling — male, female, 90° angle, push lock, and hose variants for secure coolant connections.

Large Flow Couplings

Large flow couplings for high-volume mould cooling applications. Designed for maximum coolant throughput where standard couplings are insufficient.

Multi Couplings

Multi couplings for connecting several cooling circuits simultaneously. Reduces changeover time and simplifies coolant connections on complex moulds.

Hoses

Flexible and durable hoses for mould cooling systems. Designed for reliable coolant flow in demanding injection moulding environments.

Hose Protection

Hose protection sleeves and guards for mould cooling systems. Extend hose lifespan and reduce wear in high-temperature production environments.

Hose Clips

Hose clips and clamps for secure, leak-free connections in mould cooling systems. Available in multiple sizes for all standard hose types.

Fittings

Cooling system fittings in multiple sizes and configurations for precise, leak-free connections. Compatible with standard mould cooling setups.

Valves

Flow control valves for mould cooling systems. Reliable shut-off and regulation for consistent coolant flow in injection moulding processes.

Push In Fittings

Push-in fittings for fast, tool-free installation in mould cooling systems. Secure, leak-proof connections for standard cooling lines and hoses.

Manifolds

Cooling manifolds for even coolant distribution across multiple mould circuits — robust construction for reliable performance in high-volume production.

Sealant & Tape

Thread sealant and tape for leak-free connections in mould cooling systems. Chemical-resistant options suitable for water and coolant applications.

Hose Assembly Tool

Hose assembly tools for fitting and securing cooling hoses in mould systems. Designed for accurate, efficient hose preparation and installation.

Flow Measurement & Control

Flow measurement and control components for plastics processing — flow regulators, tempering units, and thermal management accessories. Fast delivery.

Flow Measurement

Single and multi-line flow measurement devices for mould cooling systems. Monitor coolant flow rates for consistent process control.

Single Line

Single line flow measurement for monitoring individual coolant circuits. Accurate flow rate readings for precise thermal management in mould cooling.

Digital Meters

Digital flow meters for real-time coolant flow monitoring in mould cooling systems. Precise readings for single line thermal management control.

Analogue Meters

Analogue flow meters for straightforward coolant flow monitoring in mould cooling systems. Robust, easy-to-read gauges with no power supply required.

Flosense 1.0

Flosense 1.0 flow monitoring system for precise coolant measurement in mould cooling. Combines flow rate and temperature readings in one compact unit.

Spare Parts

Replacement parts for flow measurement devices and meters. Keep digital and analogue flow monitors running reliably with genuine spare components.

Multi Line

Multi line flow measurement for simultaneous monitoring of multiple coolant circuits. Efficient flow control across several channels in one unit.

Analogue flow regulation

Analogue flow regulators for multi-line mould cooling systems. Manual flow control across multiple circuits for consistent coolant distribution.

Digital flow Monitoring and regulation

Digital flow monitoring and regulation for multi-line mould cooling. Real-time flow data and precise control across multiple coolant circuits.

Spare Parts

Replacement parts for multi-line flow monitoring and regulation units. Keep analogue and digital systems running with genuine spare components.

De-Scaling

De-scaling equipment for removing limescale from mould cooling circuits. Maintain flow efficiency and extend system lifespan.

Pressure testing

Pressure testing equipment for verifying integrity of mould cooling systems. Reliable tools for leak detection and system performance checks.

Water treatment

Water treatment products for clean, scale-free coolant in mould cooling systems. Protect pipework and extend the lifespan of cooling circuits.

Filters

Coolant filters for mould cooling systems. Remove particles and contaminants to protect pipework and maintain consistent flow rates.

Consumables

Cleaners, release agents, lubricants, polishes and nano coatings for daily mould maintenance and protection.

Mould Cleaner

Spray and foam cleaners for removing oil, grease and residue from mould surfaces — safe for steel and aluminium.

Mould Release

Release agents and waxes for easy part ejection and clean mould surfaces — suitable for rubber, silicone and plastic.

Mould Protect

Anti-corrosion sprays and protectants for mould storage and idle periods — long-term protection for steel tool surfaces.

Mould Lubricants

Lubricants for ejector pins, slides and guide pillars — reduce wear and prevent seizure in high-cycle injection moulds.

Mould Polish

Diamond and aluminium oxide polishes for cavity finishing — restore gloss and remove scratches from mould steel surfaces.

Nano Mould Coating

Nano coatings for mould cavities — reduce adhesion, repel moisture and extend service intervals on injection mould surfaces.

Purging Compound

Mechanical and chemical purging compounds for cleaning barrels, screws and hot runners — reduce colour change downtime.

Multi Wipes

Pre-saturated and dry wipes for mould cleaning, oil removal and surface prep — suitable for daily production use.

Absorbents

Absorbent pads, rolls and granules for oil and coolant spills — keep production areas clean and compliant with safety rules.

Temperature Control

Temperature control units, hot runner controllers, heater bands and thermocouples for stable mould processing conditions.

Hot Runner Controllers

Single and multi-zone hot runner controllers for precise nozzle and manifold temperature control in injection moulding.

Heater Bands

Mica and ceramic heater bands for injection moulding nozzles, barrels and hot runner manifolds — various wattages in stock.

Thermocouples

Type J and K thermocouples for hot runner and mould temperature measurement — standard and custom lengths available.

Connectors

Square, narrow, standard and high density connectors for hot runner temperature control wiring — reliable electrical connections.

Square Connectors

Square connectors for hot runner temperature control systems — robust electrical connections for demanding mould environments.

Narrow Connectors

Narrow profile connectors for hot runner wiring in space-restricted mould installations — secure and reliable connections.

Standard Connectors

Standard connectors for hot runner and temperature control system wiring — compatible with most controller brands and setups.

High Density Connectors

High density connectors for multi-zone hot runner systems — more pins in less space for complex mould temperature control.

Mini Connectors

Miniature thermocouple connectors for space-restricted hot runner and temperature control installations — Type J and K available.

Cables

Extension and compensation cables for thermocouples and heater bands in hot runner and temperature control installations.

Thermometers

Contact and infrared thermometers for spot temperature checks on moulds, barrels and hot runner components.

Thermal Cameras

Thermal imaging cameras for detecting hot spots, uneven heating and heat loss in moulds and injection moulding equipment.

Cable Glands

Metric and PG cable glands for sealing and protecting cable entries in hot runner junction boxes and control panels.

Cable Cutter And Stripper

Precision cable cutters and strippers for thermocouple and heater band wiring in hot runner and temperature control work.

Material Handling

Loader hoses, hot air hoses, camlock couplings, metal detection and balances for plastics material handling and processing.

Loader Hose

Flexible loader hoses for granulate and plastic material transfer between dryers, hoppers and conveying systems.

Hot Air Hose

Heat-resistant hot air hoses for plastic dryers, granulate conveying and hot air blower connections — various diameters in stock.

Hose Clamps

Stainless and galvanised hose clamps for loader hoses, hot air hoses and material conveying connections in plastics processing.

Camlock Couplings Aluminium

Aluminium camlock couplings for fast hose connection and disconnection in granulate handling and material transfer systems.

Metal Detection

Inline and gravity-feed metal detectors for protecting injection moulding machines from metal contamination in granulate feeds.

Material Scoops

Plastic and stainless material scoops for measuring and transferring granulate, masterbatch and additives in production areas.

Moisture Analyser

Precision balances and moisture analysers for measuring granulate moisture content and shot weight in plastics processing.

End of Arm Tooling

Grippers, vacuum cups, quick change systems and EOAT components for robot automation in injection moulding and plastics handling.

Quick Change System

Dovetail and round quick change systems for fast EOAT swaps on injection moulding robots — plates, interfaces and wall mounts in stock.

Dovetail Plate Quick Change System

Dovetail plate quick change systems for fast and repeatable EOAT tool swaps on injection moulding and handling robots.

EOAT Base Plates

Aluminium and steel base plates for mounting EOAT components to quick change systems — compatible with dovetail and round changers.

Wall Mount Dovetail

Wall mount dovetail brackets for storing and docking EOAT tools during robot changeover — stable and space-saving solutions.

Round Quick Changer System

Round quick changer systems for secure and repeatable EOAT tool changes on injection moulding and assembly robots.

Quick Changer Interface

Interface plates connecting EOAT tools to quick changer systems — precise alignment and secure locking for automated tool changes.

Electrical Connectors

Electrical connectors for passing signals and power through quick change interfaces — compatible with standard EOAT systems.

Wall Mounts Round

Round wall mount brackets for docking and storing EOAT tools fitted with round quick changer systems between robot cycles.

Locating Pin

Hardened locating pins for precise EOAT alignment in quick change systems — ensure repeatable positioning on every tool change.

Profile & Channel Nuts

Aluminium profiles, channel nuts and accessories for building lightweight EOAT frames and robotic tooling structures.

Aluminum Profiles

Extruded aluminium profiles for constructing lightweight and rigid EOAT frames and robot tooling structures in plastics automation.

Channel Nuts

T-slot and spring channel nuts for securing components to aluminium profiles in EOAT frames and robotic tooling structures.

Profile Accessories

Brackets, end caps, connectors and fasteners for aluminium profile systems used in EOAT and robot tooling frame construction.

Profile Connectors

Corner brackets, cross joints, end connectors and adjustable connectors for aluminium profile systems in EOAT construction.

Profile Corner Bracket

Inside and outside corner brackets for joining aluminium profiles at 90° in EOAT frames and robotic tooling structures.

Cross Joint Connectors

Cross joint connectors for joining four aluminium profiles at a single node — for complex EOAT and tooling frame layouts.

Square Joint Connectors

Square joint connectors for secure right-angle connections between aluminium profiles in EOAT and robot tooling assemblies.

End Connectors

End connectors and caps for terminating aluminium profile runs cleanly in EOAT frames and robotic tooling structures.

S, L, T Flat Connectors

Flat S, L and T connectors for surface-mounted joins between aluminium profiles in EOAT and modular tooling frame builds.

Adjustable Connectors

Adjustable angle connectors for aluminium profile systems — set custom angles in EOAT frames and robotic tooling structures.

Clamps

Cross clamps, angle clamps, tube connectors and mounting brackets for aluminium profile and tube-based EOAT structures.

Cross Clamps

Cross clamps for joining round tubes and aluminium profiles at right angles in EOAT frames and robotic tooling structures.

Angle Clamps

Fixed angle clamps for joining tubes and profiles at set angles in EOAT frames and robotic tooling construction.

Angle Clamps With Ball Joint

Angle clamps with ball joint for infinitely adjustable tube and profile connections in EOAT and robot tooling builds.

Angle Clamps With Swivel Head

Angle clamps with swivel head for adjustable positioning of tubes and profiles in EOAT frames and automation structures.

Slotted Mounting Brackets

Slotted brackets for adjustable component mounting on aluminium profiles and tubes in EOAT and robotic tooling frames.

Threaded Mounting Brackets

Threaded brackets for fixed component mounting on aluminium profiles and tubes in EOAT and robot tooling assemblies.

Cross Tube Connector

Cross tube connectors for joining round tubes at perpendicular angles in EOAT frames and robotic tooling structures.

Parallel Tube Connector

Parallel tube connectors for aligning and joining tubes side by side in EOAT frames and robotic handling structures.

Reducer

Tube reducers for connecting different diameter tubes in EOAT frames and aluminium profile-based robotic tooling builds.

Gripper Arms

Elbow arms, angle arms, extension tubes and swivel gripper suspensions for robot EOAT gripping in plastics automation.

Heavy Duty Elbow Arms

Elbow arms, angle arms, extension tubes and swivel gripper suspensions for robot EOAT gripping in plastics automation.

Elbow Arms

Standard elbow arms for positioning gripper components in EOAT systems on injection moulding and handling robots.

Angle Arms

Fixed angle arms for setting gripper orientation in EOAT systems — precise and repeatable positioning on automation robots.

Centering Pin

Hardened centering pins for accurate and repeatable alignment of gripper components in EOAT systems and robot tooling.

Extension Tubes

Aluminium extension tubes for increasing gripper arm reach in EOAT systems — various lengths for injection moulding robots.

Gripper Suspension – Swivel Head

Swivel head gripper suspensions for flexible gripper orientation in EOAT systems on injection moulding and handling robots.

Spring Loaded Elbow Arm – Swivel Head

Spring loaded elbow arms with swivel head for adaptive gripper positioning and compliance in robot EOAT gripping systems.

Vacuum Cup Mounts

Rigid arms, suspensions, spring loaded and telescopic vacuum cup mounts for robot EOAT gripping in plastics automation.

Suspensions for Vacuum Cups

Flexible suspensions for mounting vacuum cups in EOAT systems — absorb position variation during robot pick and place cycles.

Rigid Vacuum Cup Arms

Rigid aluminium arms for fixed vacuum cup positioning in EOAT systems on injection moulding and part handling robots.

Vacuum Cup Mounts

Standard vacuum cup mounts for attaching suction cups to EOAT frames and robot tooling in plastics handling applications.

Vacuum Cup Mounts – Long

Extended length vacuum cup mounts for reaching deep cavities and recessed surfaces in robot EOAT pick and place tasks.

Suspensions Rotative

Rotative vacuum cup suspensions allowing cup rotation to match part surface angles in robot EOAT handling systems.

Suspensions Non-Rotative

Fixed non-rotative suspensions for stable vacuum cup positioning in EOAT systems on injection moulding robots.

Suspensions Non-Rotative Swivel Head

Non-rotative suspensions with swivel head for angled vacuum cup positioning in robot EOAT and plastics handling systems.

Spring Loaded Vacuum Cup Arm Rotative

Spring loaded rotative vacuum cup arms for compliant and adaptive suction gripping in robot EOAT automation systems.

Spring Loaded Vacuum Cup Arm Non-Rotative

Spring loaded non-rotative arms for stable and compliant vacuum cup mounting in EOAT systems on plastics handling robots.

Spring Loaded Vacuum Cup Arm Non-Rotative Swivel Head

Spring loaded non-rotative arms with swivel head for adjustable vacuum cup angles in robot EOAT gripping systems.

Level Compensators Non-Rotative

Non-rotative level compensators for maintaining consistent vacuum cup contact on uneven part surfaces in EOAT systems.

Telescopic Self- Retracting Suspensions

Telescopic self-retracting suspensions for variable reach vacuum cup mounting in robot EOAT and plastics handling systems.

Spring Rod

Spring rods for flexible and compliant vacuum cup mounting in EOAT systems — absorb impact and variation during robot cycles.

Vacuum Cups

Flat, bellow and multiflex vacuum cups in G, F, B, CM and CL series for robot EOAT gripping in plastics automation.

G Series, Flat Cups

G Series flat vacuum cups for smooth and rigid surface gripping in robot EOAT systems — reliable suction on flat plastic parts.

F Series, Flat Cups with Cleats

F Series flat vacuum cups with cleats for secure gripping of smooth flat surfaces in robot EOAT handling applications.

B Series, 1.5 Bellow Cups

B Series 1.5 bellow vacuum cups for flexible and gentle gripping of uneven and curved surfaces in robot EOAT systems.

CM Series, 1.5 Bellow Cups

CM Series 1.5 bellow vacuum cups for precise and adaptive gripping of varied surfaces in robot EOAT automation systems.

CL Series, 1.5 Bellow Cups

CL Series 1.5 bellow vacuum cups for versatile and gentle part gripping in robot EOAT and plastics handling applications.

CL Series, 2.5 Bellow Cups

CL Series 2.5 bellow vacuum cups for deep flexible gripping of curved and irregular surfaces in robot EOAT systems.

G Series, 1.5 Bellow Cups with Foam Ring

G Series 1.5 bellow cups with foam ring seal for gentle gripping of delicate and sensitive surfaces in EOAT systems.

G Series, 2.5 Bellow Cups with Foam Ring

G Series 2.5 bellow cups with foam ring for enhanced sealing on uneven and curved surfaces in robot EOAT applications.

Fittings

Push-in and threaded fittings for connecting vacuum cups to EOAT systems and robot suction circuits — various thread sizes.

1.5 Bellow Multiflex Vacuum Cups

1.5 bellow Multiflex vacuum cups for gripping irregular and delicate surfaces with multiple independent suction zones.

2.5 Bellow Multiflex Vacuum Cup

2.5 bellow Multiflex vacuum cups for deep flexible gripping of complex and uneven surfaces in robot EOAT automation.

Sprue Grippers

M-Series, mini, compact and large sprue grippers for automated sprue removal in injection moulding robot EOAT systems.

M - Series Sprue Grippers

M-Series sprue grippers for precise and reliable sprue removal in robot EOAT systems on injection moulding machines.

Mini Sprue Grippers

Miniature sprue grippers for handling small and delicate sprues in compact robot EOAT systems on injection moulding machines.

Small Sprue Grippers

Small sprue grippers for precise sprue removal in space-restricted robot EOAT setups on injection moulding machines.

Compact Sprue Grippers

Compact sprue grippers for efficient sprue removal in tight robot EOAT configurations on injection moulding machines.

Compact Sprue Grippers – GZ.AA

GZ.AA compact sprue grippers for precise automated sprue removal in space-restricted robot EOAT configurations.

Large Sprue Grippers

Large sprue grippers for handling heavy and oversized sprues in robot EOAT systems on large injection moulding machines.

Power Grippers

High-force power grippers for demanding sprue and part handling tasks in robot EOAT systems on injection moulding machines.

Finger Grippers

Angled finger grippers, tilt units and sensor brackets for precise part and sprue handling in robot EOAT automation.

Finger Grippers 21°

21° angle finger grippers for precise part gripping and sprue removal in robot EOAT systems on injection moulding machines.

Finger Grippers 21°, 25°

21° and 25° finger grippers for flexible and accurate part handling in robot EOAT systems on injection moulding machines.

35° - 90° - 95 Finger Grippers

Wide angle finger grippers at 35°, 90° and 95° for complex part positioning and gripping in robot EOAT automation systems.

Finger Grippers with Stops

Finger grippers with integrated stops for controlled and repeatable gripping positions in robot EOAT automation systems.

Stops, Guides & Spares

Replacement stops, guides and spare parts for maintaining finger grippers in robot EOAT systems — keep automation running.

Sensor & Sensor Mounting Brackets

Sensors and mounting brackets for adding position feedback and detection to finger grippers in robot EOAT automation systems.

90° Tilt Units

90° tilt units for rotating and repositioning gripper tools in robot EOAT systems — precise angular part handling.

Perpendicular Finger Grippers

Perpendicular finger grippers and Viton pads for 90° part gripping in robot EOAT systems on injection moulding machines.

General Purpose Grippers

Parallel, compact and angular grippers with interchangeable jaws for versatile part handling in robot EOAT automation systems.

Compact Parallel Grippers

Compact parallel grippers for precise part handling in space-restricted robot EOAT configurations on automation machines.

Parallel Grippers

Parallel grippers for reliable and repeatable part gripping in robot EOAT systems across a range of automation applications.

Jaws for Parallel Grippers

Replacement and interchangeable jaws for parallel grippers in robot EOAT systems — various profiles for different part geometries.

Angular Grippers

Angular grippers for inward and outward gripping movements in robot EOAT systems on injection moulding and handling machines.

Speciality Grippers

Doc and lock grippers and expansion grippers for specialised part handling and positioning in robot EOAT automation systems.

Doc and Lock Grippers

Doc and lock grippers for precise part locking and secure positioning in robot EOAT systems on injection moulding machines.

Expansion Grippers

Expansion grippers for gripping parts from the inside — reliable internal holding in robot EOAT and plastics handling systems.

Nippers

Air nipper bodies, N and GPT series blades and nipper mounts for automated sprue and gate cutting in robot EOAT systems.

Nipper Bodies

Pneumatic nipper bodies for automated sprue and gate cutting in robot EOAT systems on injection moulding machines.

Air Nipper Blades - N Series

N Series replacement blades for air nippers — sharp and durable cutting edges for automated sprue removal in EOAT systems.

Nipper Blades - GPT Series

GPT Series nipper blades for heavy duty sprue and gate cutting in robot EOAT systems on injection moulding machines.

Nipper Mounts

Nipper mounts for securing air nipper bodies to EOAT frames — stable positioning and easy blade access during robot cycles.

Cylinders & Slides

Compact, mini and vacuum cylinders with mounts and accessories for linear motion in robot EOAT automation systems.

Compact Cylinders with Guide Rod

Compact cylinders with guide rod for precise and stable linear motion in robot EOAT and plastics handling automation systems.

Compact Cylinders

Compact pneumatic cylinders for linear actuation in robot EOAT systems — space-saving design for injection moulding automation.

Mounts & Accessories

Mounting brackets and accessories for fitting compact and mini cylinders to robot EOAT frames and automation structures.

Vacuum Cylinders

Vacuum cylinders combining linear motion and suction for integrated gripping and actuation in robot EOAT automation systems.

Mini Cylinders

Miniature pneumatic cylinders for linear actuation in space-restricted robot EOAT configurations on automation machines.

Accessories

Sensors, switches and fitting accessories for compact and mini cylinders in robot EOAT and plastics handling automation systems.

Fittings, Tube & Manifolds

Push-in fittings, G and R thread fittings, flow controllers, manifolds and tube for pneumatic robot EOAT automation systems.

Manifolds

Pneumatic manifolds for distributing air to multiple vacuum cups and grippers in robot EOAT and plastics handling systems.

Fittings – G Thread with O-Ring

G thread fittings with O-ring seal for leak-free pneumatic connections in robot EOAT and automation systems — various sizes.

Push to Connect Fittings

Push-in pneumatic fittings for fast and secure tube connections in robot EOAT vacuum and gripper automation systems.

Fitting – R Thread

R thread pneumatic fittings for secure connections in robot EOAT vacuum and gripper systems — compatible with standard components.

Male Elbow Flow Controller

Male elbow flow controllers for regulating air flow to vacuum cups and grippers in robot EOAT automation systems.

Inline Flow Controller

Inline flow controllers for precise air flow regulation in robot EOAT vacuum and pneumatic gripper automation systems.

Tube

Polyurethane and nylon tube for connecting fittings, valves and components in robot EOAT automation systems.

Electronics & Sensors

Cable connectors, magnetic and inductive sensors, programmable sensors and sensor boxes for robot EOAT automation systems.

Cable Connectors

Cable connectors for secure and reliable sensor and actuator wiring in robot EOAT and industrial automation systems.

Magnetic Sensors for C Slots

Magnetic sensors for C slot mounting on pneumatic cylinders — precise piston position detection in robot EOAT systems.

Magnetic Sensors for T Slots

Magnetic sensors for T slot mounting on pneumatic cylinders — reliable piston position detection in robot EOAT systems.

Programmable Sensors for C Slots

Programmable magnetic sensors for C slot cylinders — adjustable switching points for flexible robot EOAT automation setups.

Inductive Sensors

Inductive proximity sensors for metal part detection and position sensing in robot EOAT and plastics handling automation.

Sensor Boxes

Sensor junction boxes for organising and protecting sensor wiring in robot EOAT frames and automation system installations.

End of Barrel

Nozzle tips, screw tip assemblies and end of barrel accessories for injection moulding — OEM-compatible tips for Arburg, Fanuc, Demag, Engel and more.

Removable Nozzle Tips - Mouldpro Type

General purpose, nylon reverse, full taper and nylon type removable nozzle tips for injection moulding machines.

OEM Nozzle Tips - Arburg Type

OEM-compatible nozzle tips for Arburg machines — M36x2 thread and general purpose versions in stock.

OEM Nozzle Tips - Fanuc Type

OEM-compatible nozzle tip for Fanuc injection moulding machines — M24x2 thread version available.

OEM Nozzle Tips - Demag Type

OEM-compatible nozzle tip for Demag injection moulding machines — M24x1.5 thread version available.

OEM Nozzle Tips - Engel Type

OEM-compatible nozzle tip for Engel injection moulding machines — M24x1.5 thread version available.

Screw Tips

Screw tip assemblies for injection moulding machines — check valve components for consistent melt delivery.

Tip Spanner

Tip spanners, gauntlet gloves and nozzle removal tools for safe end of barrel maintenance on injection moulding machines.

Tools & Accessories

Hand tools, protective gear, measuring instruments and workshop accessories for mould making and injection moulding production.

Gate cutters

Gate cutters for clean and precise sprue and gate removal on injection moulded plastic parts — various blade types in stock.

Deburring tools

Deburring tools for removing flash, sharp edges and burrs from injection moulded parts and mould steel surfaces.

Soft tools

Soft hammers, mallets and non-marking tools for working on polished mould surfaces without scratching or damage.

Pry Bars

Steel and aluminium pry bars for safe mould opening, parting and component separation in injection moulding workshops.

Accessories

Workshop accessories for mould making and injection moulding production — storage, organisation and handling essentials.

Polishing & Abrasives

Polishing machines, rotary tools, stones, diamond paste and abrasives for cavity finishing and mould surface preparation.

Polishing Machines

Electric and pneumatic polishing machines for cavity finishing, surface preparation and gloss polishing of injection moulds.

Rotary Tools

Rotary tools and die grinders for mould repair, cavity finishing and surface preparation in injection mould workshops.

Polishing Stones and Files

Polishing stones and files in various grits for hand finishing, scratch removal and surface preparation of mould steel.

Diamond Paste

Diamond polishing paste in fine to coarse grades for achieving high-gloss cavity finishes on injection mould steel surfaces.

Abrasives and Gauze

Abrasive papers, pads and gauze in various grits for surface preparation and finishing of injection mould steel cavities.

Brushes

Steel, brass and nylon brushes for cleaning mould cavities, cooling channels and workshop surfaces in injection moulding.

Compressed Air Blow Guns

Compressed air blow guns for removing dust, chips and debris from mould cavities and machine surfaces in production areas.

Measuring tools

Calipers, micrometers, gauges and measuring instruments for dimensional checks in mould making and injection moulding work.

Magnifying Glasses

Magnifying glasses and loupes for inspecting mould surfaces, cavity details and part quality in injection moulding workshops.

Machine Accessories

Mould screens, ejector couplings, machine mounts, linear transducers and hydraulic couplings for injection moulding machines.

Mould Screens

Protective mould screens for guarding operators from ejected parts and debris during injection moulding machine operation.

Ejector Couplings

Ejector couplings for connecting mould ejector plates to injection moulding machine ejector rods — various sizes in stock.

Linear Transducer

Linear transducers for precise position measurement and control on injection moulding machines and hydraulic systems.

Hydraulic Couplings

ISO A/B and BPX non-spill hydraulic couplings for core pull and hydraulic circuit connections on injection moulding machines.

BPX Hydraulic Coupling Series

BPX non-spill hydraulic couplings and plugs with female thread for core pull connections on injection moulding machines.

Hydraulic Coupling Type A/ B

ISO A and ISO B hydraulic couplers and plugs for core pull connections on injection moulding machines.

Mould Clamping

Power, standard and mechanical clamps, nuts, washers, straight studs and T-nuts for securing moulds to injection moulding machines.

Power Clamps

Hydraulic and pneumatic power clamps for fast and secure mould clamping on injection moulding machine platens.

Mechanical Clamps

Mechanical clamps for reliable mould securing on injection moulding machine platens — robust construction for heavy moulds.

Nuts & Washers

Clamping nuts and washers for securing mould clamps and studs to injection moulding machine platen T-slots.

Straight Studs

Straight clamping studs for fixing mould clamps to injection moulding machine platens — metric sizes in stock.

T-nuts

T-nuts for securing clamping studs and components in injection moulding machine platen T-slots — various metric sizes.

Mould Handling

Mould tables, lifting eyebolts, swivel anchor points, chain slings, and shackles for safe and efficient mould movement and workshop setup.

Swivel Anchor point

Swivel anchor points for safe and flexible mould lifting — rotate under load for correct chain alignment and operator safety.

Super Lifting Points

High-capacity super lifting points for lifting heavy injection moulds safely — rated for multi-directional load angles.

Eye Bolts And Shackles

Eye bolts and shackles for attaching lifting equipment to injection moulds — various metric thread sizes and load ratings.

Lifting Chain Slings

Chain slings for safe lifting and positioning of heavy injection moulds in workshop and production environments.

Mould Feet

Plastic and steel mould feet for safe and stable mould storage — protect mould bases and parting lines during downtime.

Mould Splitting Tables

Standard, magnetic, mechanical and forged bracket splitting tables in 1.5–6T capacity for safe injection mould opening.

Mould Components

Ejector pins, dowel pins, screws, spring plungers, ISO springs and mould monitoring systems for injection mould building.

Ejector Pins

Hardened ejector pins in standard and custom lengths for reliable part ejection in injection moulds — DIN and ISO sizes in stock.

Dowel Pins

Hardened and ground dowel pins for precise component alignment and location in injection mould assemblies — metric sizes in stock.

Screws

Socket head cap screws and mould assembly fasteners in metric sizes for securing components in injection mould builds.

Spring Plungers

Ball and pin spring plungers for controlled positioning and light retention of mould components during assembly and operation.

ISO Springs

ISO colour-coded die springs for ejector plates, stripper plates and mould components — light, medium and heavy loads in stock.

Mould Monitoring

Mould monitoring systems for detecting part presence, ejector position and process faults in injection moulding production.
Technology

Flosense

Flosense 1.0

Flosense 2.0

Flosense 3.0

Flosense 4.0

Hose Configurator

Prodoptim
Support Center

News & Events

Downloads section

Safety data sheets

Technical data sheets

Manuals
Our Network

Products
End of Arm Tooling
Speciality Grippers
Doc and Lock Grippers
Centering locking unit

Product number:

PROD309

Centering locking unit

Roborex

Files

Files

Specifications

Single acting

High gripping force

ISO H7 tolerance is used for positioning

Images

Centering locking unit

Centering locking unit

DETAIL1517

DETAIL1725

Centering Locking Unit for Secure Positioning | Mouldpro

YOU MAY ALSO LIKE

Mouldpro ApS
Baltorpbakken 10
2750 Ballerup
Denmark

VAT No: 32767567

/Files/Icons/phone.svg

+45 70 20 31 31

/Files/Icons/envelope.svg

sales@mouldpro.com

Copyright © 2026 Mouldpro ApS. All rights reserved.

Favourite list updated